The Ultimate Guide to Best Way to Clean Marijuana Pipe

Spread the love

Smoking a Marijuana Pipe is one of the absolute best methods of marijuana consumption. You don’t have to waste time making a filter and rolling a joint every time you smoke, nor do you have to go through the complexities of using a device such as a Dab Rig. All you have to do is to add some weed to the bowl, light, and inhale. However, after using your Pipe for a while, resin and debris will accumulate, so you need to know the best way to clean a Marijuana Pipe.

Glass Pipes can get dirty quite easily. Your bowl is especially susceptible to leftover resin, but your entire Pipe is prone to the build-up of bacteria when you use it regularly. Although Silicone Pipes are slightly more resistant to resin and grime, it’s still essential to clean your Pipe frequently to ensure it’s clean, effective, and safe to smoke from.

You don’t necessarily need to give your Marijuana Pipe a thorough clean after every time you use it. Sometimes a simple rinse can avoid it getting too dirty. However, there are some occasions where you’ll want to use the most effective cleaning methods to get rid of grime, dirt, and resin and leave your Pipe sparkly clean. Here’s the ultimate guide to the best way to clean a Marijuana Pipe.

Why You Should Clean Your Marijuana Pipe

When all you want to do is to smoke some weed and get high, cleaning is probably the last thing on your mind. Cleaning your Marijuana Pipe might seem tedious and inconvenient, but there are many reasons why it’s essential to keep your Marijuana Pipe clean.

Since your Marijuana Pipe is constantly coming into contact with organic plant matter, burning chemicals, smoke, and your saliva, bacteria can build up swiftly. Bacteria can grow inside your Pipe in as little as 22 hours, and the longer you leave it unclean, the worse this can get. In severe cases a dirty Pipe can even cause lung problems, so don’t slack off on cleaning.

The built-up bacteria in your Pipe can also make your smoking experience less pleasant. Not only will it leave behind a nasty smell in your Pipe, but the taste of your marijuana hits will also be tainted. When you use a Pipe, you want the cleanest, purest, and most flavorful smoke possible, so you’ll need to clean it regularly.

It’s also harder to use a dirty Marijuana Pipe. Built-up resin around the bowl can make it harder to get nice, smooth hits, and the longer you leave to clean it, the harder it will be. You could even end up damaging your Pipe if you don’t clean it often enough. Plus, cleaning your Pipe is a relatively hassle-free affair.

When You Should Clean Your Marijuana Pipe

When You Should Clean Your Marijuana Pipe

Another common question that smokers have is when they should clean their Marijuana Pipe. Cleaning it thoroughly every time you use it might seem like a hassle, especially for frequent smokers. However, waiting weeks to clean it can result in all kinds of drawbacks. So what’s the best approach?

Realistically, it’s best to clean your Marijuana Pipe every day. That way you can avoid bacteria building up in your Pipe overnight and you can also avoid any potential damage to your Pipe or your health.

While you might not want to go through a length cleaning process every time you use your Marijuana Pipe, simply rinsing it in some boiling water after using it is enough to remove any leftover resin and leave your Pipe looking clean and fresh. Rinse it and dry it afterward and your Pipe is ready for your next smoking session. This only takes a few minutes, so do it after you smoke.

Some frequent smokers leave it for a couple of days or so to clean their Pipe. However, waiting for too long will result in a filthy Pipe that’s dangerous to use. If you haven’t cleaned your Pipe in a while, you’ll want to clean it as thoroughly as possible. Our step-by-step guide will teach you the best way to clean your Marijuana Pipe.

Step 1: Empty Your Pipe And Rinse It

The first step is to remove any leftover weed or ashes from your Pipe and rinse it thoroughly. Lazy smokers often leave bits of burnt weed and resin in their Pipe after smoking, and you’ll want to make sure you clean your Pipe of these before you move onto the next step.

Most Pipes are easy enough to rinse. Simply run them under some hot water and scrub away at the resin and any other leftover debris on your Pipe. Don’t just clean your bowl- make sure you rinse the entire device.

In some cases, you might need to take your Pipe apart. While most are simple one-piece devices, others come with detachable bowls. In these cases, you should take apart the pieces of your Pipe and rinse them separately. The same applies to Water Pipes or Bongs- carefully rinse each part of your device before anything else.

After rinsing your Pipe, quickly dry it using paper towels and get ready to move onto the next step. Although your Pipe might look clean now, it’s important to take extra measures to remove any unseen bacteria. 

Place Your Pipe In A Container With Alcohol

Step 2: Place Your Pipe In A Container With Alcohol

After you’ve emptied your Pipe and given it a good rinse, the next step is to clean it with isopropyl alcohol. Isopropyl alcohol helps sanitize your Pipe and get rid of any leftover bacteria. It can also help remove some of the stubborn resin that often gets left behind on Pipes if they haven’t been cleaned for a while.

Start by placing your Pipe in a plastic container. It’s best to avoid glass or metal containers if you’re using a Glass Pipe- these can cause your Pipe to chip or crack if it hits the edges of the container too vigorously. Something as simple as a plastic jar or bottle works well enough for this.

You don’t need to use too much isopropyl alcohol. Around a ¼ cup to ½ cup is usually enough to give your Pipe a thorough clean. You should also add two tablespoons of salt- this acts as an abrasive and makes it easier to scrub away any dirt or debris left on your Pipe.

Once you’ve combined your Marijuana Pipe with your alcohol and salt solution, shake the container thoroughly. It’s best to do this for at least 5 minutes, although you might even want to leave your Pipe lying in the alcohol for around 10-15 minutes for a thorough clean. The alcohol and salt will help remove any resin on your Pipe and leave it looking extra clean.

Step 3: Rub Any Leftover Dirt Away With A Pipe Cleaner

While the above steps are usually enough to leave most Marijuana Pipes looking exceptionally clean, some Pipes or Bongs might need a little extra help. If you haven’t cleaned your device in a while and it’s accumulated stubborn pieces of resin or any other leftover debris, then take a pipe cleaner and scrub at it until it’s gone.

In most cases, most of the resin will be in your bowl, but it’s best to clean inside your Pipe as well. The good thing about using a pipe cleaner is that it can help you clean any hard-to-reach areas so you don’t miss a spot.

If you don’t have any pipe cleaners around the house, you might want to use a cotton bud. Although it’s not quite as sturdy, it can help reach certain areas that other items can’t. You might also want to simply scrub at any resin on the outside of your pipe with a cloth, sponge, or any other kind of cleaning supply that’ll help you scrub those stubborn pieces away.

Rinse And Dry Before Use

Step 4: Rinse And Dry Before Use

Following these steps will leave even the dirtiest Marijuana Pipes and Bongs looking as good as new. However, before you rush into your next smoking session, there’s one last step. After submerging your device in alcohol and salt, you’ll need to give it another rinse before you try to smoke from it.

Simply run some hot running water and place your device under it. Make sure you rinse your Pipe thoroughly. You might even want to leave it in a container of hot water for a few minutes to ensure that every spot has been rinsed.

After rinsing your device, clean it using paper towels or a clean cloth or towel. After this, you should be left with a sparkly clean device. You can now go back to enjoying exceptional smoking sessions with your fresh, pristine Marijuana Pipe.

Keep in mind that, while this is the best way to clean your Marijuana Pipe, you don’t necessarily have to go to all that effort every time you use it. Simply submerging your Pipe in hot water after each time you use it is usually enough to remove any resin quickly. The more often you clean your Pipe, the less effort it’ll take.

How To Clean A Silicone Marijuana Pipe

When it comes to Marijuana Pipes, Glass Pipes are usually the most common choice. They look great, provide smooth hits, and feel nice and sturdy when you hold them. However, Silicone Marijuana Pipes are another great option. These Pipes are completely safe to use, provide a solid smoking experience, and are also easy to clean.

Silicone is a non-stick material. That means that, while Glass Pipes often hold on to oils and burnt resin, silicone usually stays cleaner for longer. With that said, you’ll still want to clean your Silicone Pipe regularly, especially as there are so many easy methods to clean it.

Cleaning a Silicone Pipe with soap and water is usually enough to keep it nice and clean. Running it under hot water and applying some mild dish soap works well. You can even put your Silicone Pipe in the dishwasher. While putting a Glass Pipe in the dishwasher is not recommended as it can easily crack or break, Silicone Pipes can be washed just like any regular kitchen utensil.

You can also clean a Silicone Marijuana Pipe by freezing it. Putting a Glass Pipe in the freezer can often cause it to crack, but Silicone Pipes can withstand the low temperatures without a problem. Rinse your Silicone Pipe and put it in the freezer while it’s still wet. After a few hours, take it out and bend it and squeeze it. Any leftover resin will break away and simply fall out. You can now rinse your Pipe and use it again.

What To Avoid When Cleaning Your Pipe

What To Avoid When Cleaning Your Pipe

There are a few things you’ll want to avoid when cleaning your Marijuana Pipe. Make sure you take extra care- especially when cleaning a Glass Pipe. Glass is fragile and extremely prone to cracking and breaking. Don’t put it under temperatures that are too high or low and don’t try to clean it with hard materials such as metal or other glass objects.

Avoid certain chemicals such as acetone and hydrogen peroxide. Although these are effective cleaning agents, they’re not recommended for cleaning your Pipe and Bong. Instead, stick to the safest liquids possible and don’t use too much.

Even when using isopropyl alcohol, make sure you don’t use too much and don’t soak your Pipe in it for too long. It’s also essential to rinse your Pipe thoroughly afterward to make sure there’s no leftover alcohol.


If you enjoy smoking from a Marijuana Pipe, then keeping it clean is essential. A dirty Pipe won’t just ruin your smoking sessions, it can also cause health problems if the issue isn’t addressed. In most cases, just soaking your Pipe in hot water is enough to keep it nice and clean. However, when you’re left with built-up resin, follow these steps for a thorough clean.

Don’t forget to rinse and dry your Marijuana Pipe after cleaning and to keep your Pipe somewhere clean and safe when you’re not using it. As long as you follow these steps, you can enjoy clean, enjoyable smoking sessions from your Pipe regularly. As for what you should smoke, you can find all the high-quality weed you need at BuyMyWeedOnline.

Spread the love

Best Sellers

Buy My Weed has an endless amount of strains to help ease all medical conditions, such as anxiety, stress, ADD/ADHD, depression, loss of appetite muscular dystrophy, hypertension, insomnia, migraines—the list goes on. Even better, our marijuana dispensary offers the lowest prices online, guaranteed

Leave a Comment